Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Brake

General Maintenance

GENERAL MAINTENANCE

PROCEDURE

1. INSPECT BRAKE LINE PIPES AND HOSES

HINT:

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning.

(a) Check all the brake lines and hoses for:

  • Damage
  • Wear
  • Deformation
  • Cracks
  • Corrosion
  • Leaks
  • Bends
  • Twists

(b) Check all the clamps for tightness and the connections for leakage.

(c) Check if the hoses and lines are not near sharp edges, moving parts and the exhaust system.

(d) Check if the lines are installed pass through the center of the grommets.

2. INSPECT FRONT BRAKE PADS AND DISCS

HINT:

  • (See page If a squealing or scraping noise is heard from the brake while driving, )
  • If a squealing or scraping noise is heard from the brake while driving, check the pad wear indicator.
  • If there are traces of the indicator contacting the disc rotor, the disc pad should be replaced.

3. INSPECT REAR BRAKE DRUM

HINT:

See page 4. INSPECT BRAKE FLUID

4. INSPECT BRAKE FLUID

Fluid:

SAE J1703 or FMVSS No. 116 DOT3

HINT:

  • for Hydraulic Brake Booster (See page ) )
  • for Vacuum Brake Booster (See page )
Body
General Maintenance GENERAL MAINTENANCE PROCEDURE 1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY (a) Tighten the bolts and nuts on the chassis parts listed below, if necessary. Front axle ...

Chassis
General Maintenance GENERAL MAINTENANCE PROCEDURE 1. INSPECT STEERING LINKAGE (a) Check the steering wheel free play (See page ). (b) Check the steering linkage for looseness or damage. (1) ...

Other materials:

Components
COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

Radio Receiver Power Source Circuit
DESCRIPTION This is the power source circuit to operate the navigation receiver assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure. PROCEDURE 1. ...

System Description
SYSTEM DESCRIPTION 1. OUTLINE OF THEFT DETERRENT SYSTEM The theft deterrent system can be set/canceled by locking/unlocking the doors using the following operation: Entry lock operation*1 Wireless lock operation*2 Key-linked lock operation * ...

2015-2021 © Copyright www.luting.site