Toyota Tacoma 2015-2018 Service Manual: Clutch

Reassembly

REASSEMBLY PROCEDURE 1. INSTALL REAR AXLE HUB BOLT (a) Install a new deflector gasket and deflector onto the rear axle shaft. HINT: Align the 2 notches. ...

Clutch Accumulator

Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY (a) Install the clutch accumulator assembly to the manual transmission assemb ...

Other materials:

AUTO LSD Indicator Light does not Come ON
DESCRIPTION The AUTO LSD does not operate even if the VSC OFF switch is pressed under the following conditions: The brake system is faulty. The temperature inside the hydraulic brake booster increases and the AUTO LSD operation is suspended. The rear differential is locked. ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT PARK/NEUTRAL POSITION SWITCH (a) Apply the parking brake. (b) Turn the ignition switch to ON. (c) Depress the brake pedal and move the shift lever to any position other than P. (d) Depress the brake pedal and check that the engine starts when the sh ...

Transmission Fluid Temperature Sensor "A" Performance (P0711)
DESCRIPTION The No. 1 ATF temperature sensor converts the fluid temperature into a resistance value for use by the ECM. The ECM applies a voltage to the temperature sensor through terminal THO1 of the ECM. The sensor resistance changes with the ATF temperature. As the temperature becomes hi ...