Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Customize Parameters

CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE SLIDING ROOF SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function(s) can be customized.
  • Be sure to make notes of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Slide Roof.

(5) Select the setting by referring to the table below.

Display

Default

Content

Setting

Relevant ECU

Door Key Related Operation

Slide

Function to select tilt up or slide open of sliding roof key-linked function.

Slide/Tilt

Sliding roof ECU (Sliding roof drive gear sub-assembly)

Wireless Key Related Operation

Slide

Function to select tilt up or slide open of sliding roof wireless transmitter-linked function.

Slide/Tilt

Sliding roof ECU (Sliding roof drive gear sub-assembly)

Front SW Auto Operation

ON

This function is used to enable or disable the auto operation.

OFF/ON

Sliding roof ECU (Sliding roof drive gear sub-assembly)

(6) Enter the following menus: Customize Setting / Security.

(7) Select the setting by referring to the table below.

Display

Default

Content

Setting

Relevant ECU

Slide Roof Open Warning

ON

This function is used to enable or disable the sliding roof open warning.

OFF/ON

Main body ECU (Multiplex network body ECU)

System Diagram
SYSTEM DIAGRAM ...

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the sliding roof system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT T ...

Other materials:

Installation
INSTALLATION PROCEDURE 1. INSTALL REAR BUMPER ASSEMBLY (a) Using an engine lifter or equivalent, engage the 2 pins to install the rear bumper assembly. Text in Illustration *a Pin - - NOTICE: Using plate lift attachments or equiv ...

Installation
INSTALLATION PROCEDURE 1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 2. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY 3. INSTALL IGNITION COIL ASSEMBLY 4. INSTALL FUEL INJECTOR SEAL 5. INSTALL FUEL INJECTOR ASSEMBLY 6. INSTALL FUEL DELIVERY PIPE RH 7. INSTALL FUEL DELIVERY PIP ...

Sensor (Motor) Failure (B2341,B2344)
DESCRIPTION When the sliding roof ECU (sliding roof drive gear sub-assembly) detects a motor malfunction and the sliding roof operation is stopped, DTC B2341 is stored. When the sliding roof ECU (sliding roof drive gear sub-assembly) detects a gear position malfunction and the sliding roof ope ...

2015-2021 © Copyright www.luting.site