Toyota Tacoma 2015-2018 Service Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)

(a) Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly in the locations shown in the illustration. Text in Illustration *1 O-ring

(b) Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with 2 new bolts.

Torque:

10 NВ·m {102 kgfВ·cm, 7 ftВ·lbf}

NOTICE:

Be careful that the O-ring is not jammed.

(c) Connect the connector to the camshaft timing oil control solenoid assembly.

2. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)

(a) Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly in the locations shown in the illustration. Text in Illustration *1 O-ring

(b) Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with 2 new bolts.

Torque:

10 NВ·m {102 kgfВ·cm, 7 ftВ·lbf}

NOTICE:

Be careful that the O-ring is not jammed.

(c) Connect the connector to the camshaft timing oil control solenoid assembly.

3. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)

(a) Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly in the locations shown in the illustration. Text in Illustration *1 O-ring

(b) Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with 2 new bolts.

Torque:

10 NВ·m {102 kgfВ·cm, 7 ftВ·lbf}

NOTICE:

Be careful that the O-ring is not jammed.

(c) Connect the connector to the camshaft timing oil control solenoid assembly.

4. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)

(a) Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly in the locations shown in the illustration. Text in Illustration *1 O-ring

(b) Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with 2 new bolts.

Torque:

10 NВ·m {102 kgfВ·cm, 7 ftВ·lbf}

NOTICE:

Be careful that the O-ring is not jammed.

(c) Connect the connector to the camshaft timing oil control solenoid assembly.

5. INSTALL THROTTLE BODY BRACKET

(a) Install the throttle body bracket to the intake air surge tank assembly and timing chain cover assembly with the 2 bolts.

Torque:

21 NВ·m {214 kgfВ·cm, 15 ftВ·lbf}

6. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

(a) Apply engine oil to a new O-ring and install it to the engine oil level dipstick guide.

(b) Install the engine oil level dipstick guide to the timing chain cover assembly and oil pan sub-assembly with the bolt.

Torque:

10 NВ·m {102 kgfВ·cm, 7 ftВ·lbf}

(c) Engage the clamp to install the wire harness.

(d) Install the engine oil level dipstick.

7. INSTALL AIR CLEANER CAP AND HOSE

8. INSTALL V-BANK COVER SUB-ASSEMBLY

9. INSTALL FRONT FENDER SEAL RH

HINT:

Use the same procedure as for the LH side (See page ).