Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Precaution

PRECAUTION

1. IGNITION SWITCH EXPRESSIONS

(a) The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression

Ignition Switch (Position)

Engine Switch (Condition)

Ignition switch off

LOCK

Off

Ignition switch ACC

ACC

On (ACC)

Ignition switch ON

ON

On (IG)

Engine start

START

Start

2. PRECAUTION FOR WHEN USING WIRELESS CHARGER

(a) If the mobile wireless charger cradle assembly surface becomes too hot during charging operation, the indicator lights (green and amber) on the mobile wireless charger cradle assembly will blink and charging will be canceled. If the surface cools down, the indicator light (amber) will be illuminated and charging will be resumed.

(b) A rechargeable device may not be recharged depending on the shape, material or thickness of accessories applied to it, such as a cellular phone cover.

(c) Do not put foreign matter or metal objects, such as a paper clip, between the charging area and the rechargeable device. Doing so may result in a charging failure, or burns or a fire due to overheating of the metal object.

(d) Do not apply a metallic object, such as an aluminum sticker, to the mobile wireless charger cradle assembly. Doing so may result in burns or a fire due to overheating of the metal object.

Wireless Charging System
...

Parts Location
PARTS LOCATION ILLUSTRATION ...

Other materials:

Removal
REMOVAL CAUTION / NOTICE / HINT CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page ). If the side airbag was deployed, replace the front seat assembly with a ne ...

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL FRONT AXLE HUB OIL SEAL (a) Using a brass bar and a hammer, install a new front axle hub oil seal. NOTICE: Do not damage the oil seal. 2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY (a) Using SST and a press, install a new bearing onto the front axle ...

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Perform the following procedure to troubleshoot the dynamic radar cruise control system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...

2015-2021 © Copyright www.luting.site