Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Repair

REPAIR

PROCEDURE

1. REPAIR INTAKE VALVE SEATS

NOTICE:

  • Repair the intake valve seat while checking the seating position.
  • Keep the lip free of foreign matter.

(a) Using a 45В° cutter, resurface the valve seat so that the valve seat width is more than the specification.

(b) Using 30В° and 60В° cutters, correct the valve seat so that the intake valve contacts the entire circumference of the seat. The contact should be in the center of the intake valve seat, and the intake valve seat width should be maintained within the specified range around the entire circumference of the intake valve seat.

Text in Illustration

*a

Standard Width

Standard width:

1.1 to 1.5 mm (0.0433 to 0.0591 in.)

(c) Hand-lap the intake valve and intake valve seat with an abrasive compound.

(d) Check the intake valve seating position.

2. REPAIR EXHAUST VALVE SEATS

NOTICE:

  • Repair the seat while checking the seating position.
  • Keep the lip free of foreign matter.

(a) Using a 45В° cutter, resurface the valve seat so that the valve seat width is more than the specification.

(b) Using 30В° and 75В° cutters, correct the exhaust valve seat so that the exhaust valve contacts the entire circumference of the seat. The contact should be in the center of the exhaust valve seat, and the exhaust valve seat width should be maintained within the specified range around the entire circumference of the exhaust valve seat.

Text in Illustration

*a

Standard Width

Standard width:

1.3 to 1.7 mm (0.0512 to 0.0669 in.)

(c) Hand-lap the exhaust valve and exhaust valve seat with an abrasive compound.

(d) Check the exhaust valve seating position.

Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT: Perform "Inspection After Repairs" after replacing the cylinder head sub-assembly or cylinder head LH (See page ). PROCEDURE 1. INSTALL SPARK ...

Cylinder Head Gasket
...

Other materials:

Air Mix Damper Position Sensor Circuit (Passenger Side) (B1431/31)
DESCRIPTION This sensor detects the position of the air mix damper (for front passenger side) and sends the appropriate signals to the air conditioning amplifier assembly. The position sensor is built into the No. 2 air conditioning radiator damper servo sub-assembly (for front passenger side ...

Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT HINT: The procedure described below is for the LH side. Use the same procedure for both the LH and RH sides, unless otherwise specified. PROCEDURE 1. REMOVE REAR SEATBACK COVER (a) Remove the 2 screws. ...

Fail-safe Chart
FAIL-SAFE CHART 1. Fail-safe This function minimizes the loss of operation when any abnormality occurs in a sensor or solenoid. Fail-safe Control List Malfunction Part Function Transmission revolution sensor (NT) During a transmission revolutio ...

2015-2021 © Copyright www.luting.site