CHECK DISPLAY SETTING
(a) Reset display settings (contrast, brightness) and check that the screen appears normal.
The display returns to normal.
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
FCM Destination Information Unmatched (C1AA1)
DESCRIPTION When the forward recognition camera is replaced with a new one, the new forward recognition camera attempts to store country specification information received from the main body ECU (multiplex network body ECU) and ECM. If the country specification information stored in the forwa ...
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT SPEEDOMETER (a) Check speedometer operation. NOTICE: The meter ECU receives the vehicle speed signal from the skid control ECU via CAN communication. Therefore, perform the following inspection referring to values on the Data List of th ...
Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows t ...