Toyota Tacoma Owners Manual: Vehicle specifications

If your vehicle has to be stopped in an emergency

Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: Steadily step on the brake pedal with both feet and ...

Specifications

...

Other materials:

ECM Communication Circuit Malfunction (C1203)
DESCRIPTION The circuit sends TRAC, A-TRAC and VSC control information from the skid control ECU (master cylinder solenoid) to the ECM, and engine control information from the ECM to the skid control ECU (master cylinder solenoid) via the CAN communication system. DTC Code ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK FUEL PUMP OPERATION AND INSPECT FOR FUEL LEAK (a) Connect the Techstream to the DLC3. (1) Turn the ignition switch to ON. NOTICE: Do not start the engine. (2) Turn the Techstream on. (3) Enter the following menus: Powertrain / Engine / Active Test / C ...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE PRESSURE RELIEF VALVE (a) Remove the pressure relief valve and O-ring. 2. REMOVE MAGNET CLUTCH ASSEMBLY (a) Secure the cooler compressor assembly in a vise between aluminum plates. (b) Using SST, hold the magnet clutch hub. SST: 09985-00260 (c) Remove the ...